Sabtu, 29 Januari 2011

Seven Things You Need to Know About Nircable Networks


Seven Things You Need to Know About Nircable Networks, that are :

1. Place is everything. Your network performance hinge AA on the computer, the ability of AA to receive the radio signal from the nircable router or access point, and this hinge on the place of the box. There must be at the top and free of metal or blockages.

2. O, or another name! What's in a name? What we call a rose
by any other name would smell as sweet. Let AOS face it. There are many people out there setting up nircable networks. And they all accept the standard network name and the name of the router that came from the factory. How do you know if you have access to your own network, if they all have the same name? Then follow Juliet and Romeo AO advice, remove your name.

3. Safety is not automatic. Your network is not sure that somebody configures the nircable device. He is not sure of the box. Unless somebody does, anyone can access your network and steal your internet access.

4. It may not be sufficient. If you are having trouble getting a strong signal or having intermittent downtime in an area of your building, you may need another access point for nircable coverage. You're not limited to a single device, you can have several, if necessary, to enable complete coverage.

5. Is there an aerial or are you just happy to see me? The antennas that come with nircable routers or access points are good, but may not be good enough. They are not saving power, low, low, omni directional antennas and are generally cheaper. For better coverage, consider replacing them with a high gain omni directional antennas fed or unidirectional.

6. To B or not to b. The standard for WiFi is designated as 802.11 with a result of the letter. First there was 802.11b, which gave a speed of 11Mb at a frequence of 2.4 GHz, followed by 802.11a speeds of 54Mb at a frequence of 5 GHz and 802.11g speeds of 54Mb at a frequence2.4 GHz and still unratified 802.11n promises speeds of 100 Mbps at a frequence of 2.4 and 5 GHz. Most people today are using 802.11g for speed and safety reasons. It is also compatible with 802.11b, meaning that any device that has an 802.11b card can still use the network. You should avoid 802.11n until it becomes official, which should be in 2008.

7. Do not meddle in the affairs of wizards. Nircable networks are based on radio waves in the free bandwidth ranges. Guess what. is that your nircable phone, AORE using your Bluetooth headset and microwave in the corner. All these devices can interfere with your network if you want to keep your access point or nircable router away from these things, or your network access will whenever Sally warms Ramen that she brought for lunch.

1 komentar:

Sendy Aditya Suryana mengatakan...

this blog is not worth without picture..!!!

Poskan Komentar

leave a comment please !
just comment, doesn't spam.

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | coupon codes